Strip Lamps
Enquire About What Other Stock And Chrome Variations Are Available
Recessed Strip Lamps - 130mm x 25mm x 12.5mm
![]() |
|
![]() |
|
![]() |
|
![]() |
Product Description: | The 25 series lamps are fully submersible, shock resistant and are ADR compliant with ECE approval (except reverse lamp). | ||||||||
Part No | 25R12 | 25A12 | 25W12 | ||||||
Voltage: | 12 Volt | 12 Volt | 12 Volt | ||||||
Cable: | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | ||||||
Current: | @13.8Volts (Stop-0.28Amps) (Tail-0.03Amps) (Ind-0.20Amps) (Rev-0.16Amps) | ||||||||
C.R.N: | These lamps comply with ADR under ECE approval (Stop/Tail E9 02 R1 S1 - 6281) (Indicator E9 01 2a - 6021) | ||||||||
Fitting: | Mount onto flat surface horizontally to the ground and run wires through back. Push lamp into cutout (106mm x 19mm) in mounting surface, fix with screws supplied at both ends. Please refer to ADR13/00 for mounting instructions. |
Recessed Strip Lamps - 237mm x 25mm x 18mm
![]() |
![]() |
![]() |
|
|
|
![]() |
Product Description: | The 235 series lamps are fully submersible, shock resistant and are ADR compliant. They are a recessed mount with rubber grommet supplied. | ||||||||
Part No | 235R | 235A | 235W | 235A24 | 235R24 | 235W24 | |||
Voltage: | 12 Volt | 12 Volt | 12 Volt | 24 Volt | 24 Volt | 24 Volt | |||
Cable: | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | |||
Current: | @13.8Volts (Stop-0.14Amps) (Tail-0.04Amps) (Ind-0.16Amps) (Rev-0.12Amps) - @28Volts (Stop-0.13Amps) (Tail-0.05Amps) (Ind-0.12Amps) (Rev-0.06Amps). | ||||||||
C.R.N: | (Stop/tail 37678) (Indicator 39092) | ||||||||
Fitting: | Mount onto flat surface horizontally to the ground and run wires through back. Push lamp and grommet into cutout (cut out 203mm x 19mm) in mounting surface and fix with screws supplied at both ends. Please refer to ADR13/00 for mounting instructions. |
Recessed Strip Lamps - 382mm x 25mm x 18mm
![]() |
![]() |
![]() |
|
|
|
![]() |
Product Description: | The 380 series lamps are fully submersible, shock resistant and are ADR compliant. They are a recess mounted with rubber grommet supplied. | ||||||||
Part No | 380R | 380A | 380W | 380R24 | 380A24 | 380W24 | |||
Voltage: | 12 Volt | 12 Volt | 12 Volt | 24 Volt | 24 Volt | 24 Volt | |||
Cable: | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | 40cm Hard wired | |||
Current: | @13.8Volts (Stop-0.16Amps) (Tail-0.04Amps) (Ind-0.18Amps) (Rev-0.14Amps) - @28Volts (Stop-0.12Amps) (Tail-0.01Amps) (Ind-0.10Amps) (Rev-0.09Amps). | ||||||||
C.R.N: | (Stop/tail 39473) (Indicator 39470) | ||||||||
Fitting: | Mount onto flat surface horizontally to the ground and run wires through back. Push lamp and grommet into cutout (cut out 348mm x 19mm) in mounting surface and fix with screws supplied at both ends. Please refer to ADR13/00 for mounting instructions. |
Slimline Strip Lamps - 404mm x 46mm x 17mm
![]() |
380CR12 • Stop/Tail | ![]() |
![]() |
• 380CA12• Indicator | |
![]() |
380CW12 • Supplementary Reverse No ADR/ECE Approval |
product Description: | The 380 series lamps have been released and blister packed with a chrome bracket that allows them to be surface mounted without the need for a cut out. The brackets are also available separately in chrome, white and black. | ||
part no | 380CR12 | 380CA12 | 380CW12 |
Voltage: | 12 Volt only | 12 Volt only | 12 Volt only |
Cable: | 40cm | 40cm | 40cm |
Current: |
@13.8Volts (Stop-0.16Amps) (Tail-0.04Amps) (Ind-0.18Amps) (Rev-0.14Amps) - @28Volts (Stop-0.12Amps) (Tail-0.01Amps) (Ind-0.10Amps) (Rev-0.09Amps). |
||
C.R.n | (Stop/tail 39473) (Indicator 39470) | ||
Fitting: | Surface mount bracket and lights horizontally to ground with screws provided, please refer to ADR 13/00 for mounting instructions. |