Round and Oblong Lamps

Enquire About What Other Stock And Chrome Variations Are Available

Combination Lamps - 140mm round x 20mm
 
 
  • 140STIM
  • Stop/Tail/Indicator
  • 140TRM
  • Stop/Tail/Reverse
  • 140TFM
  • Fog Lamp
product Description: High brightness LEDs that are shock, dust and water proof.
part no 140STIM - Blister Single
140STIMB - Bulk Poly Bag
140TRM - Blister Single
140TRMB - Bulk Poly Bag
140TFM - Blister Single
140TFMB - Bulk Poly Bag
Voltage: Multivolt 12-24V Multivolt 12-24V Multivolt 12-24V
Cable: 40cm 40cm 40cm
packaging: Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.54A) (Tail-0.08A) (Ind-0.77A)
@28Volts (Stop-0.17A) (Tail-0.06A) (Ind-0.16A).
@13.8Volts (Stop-0.54A) (Tail-0.08A) (Ind-0.39A)
@28Volts (Stop-0.17A) (Tail-0.06A) (Ind-0.23A).
@13.8Volts (Fog-0.38A)
@28Volts (Fog-0.24A).
CRN: (Stop/tail 1245) (Indicator 1245)(Fog TBA)
Fitting: Drill two 10mm holes for serrated plugs and one 12mm hole or larger for the cable. Remove the protective film from the back and simply push into place
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamps - 125mm round x 40mm
 
 
  • MaXilampC1XRE
  • Stop/Tail/Indicator/Reflector
  • MaXilamp1XRE
  • Stop/Tail/Indicator/Reflector
  • MaXilamp1XRWE
  • Reverse/Reflector
product Description: High brightness LEDs that are shock, dust and water proof.
part no MaXilampC1XRE MaXilamp1XRE MaXilamp1XRWE
Voltage: Multivolt 12-24V Multivolt 12-24V Multivolt 12-24V
Cable: 40cm 40cm 40cm
packaging: Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.34A) (Tail-0.07A) (Ind-0.37A)
@28Volts (Stop-0.17A) (Tail-0.06A) (Ind-0.16A).
@13.8Volts (Stop-0.34A) (Tail-0.07A) (Ind-0.37A)
@28Volts (Stop-0.17A) (Tail-0.06A) (Ind-0.16A).
@13.8Volts (Rev-0.39A)
@28Volts (Rev-0.23A).
CRN: (Stop/tail 6064) (Indicator 6064) (Reflector 1472) (Reverse 1150)
Fitting: Surface mount using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 7 year warranty

 

Combination Lamps - 125mm round x 40mm
 
 
  • MaXilampC1XCE
  • Stop/Tail/Indicator/Reflector
  • MaXilamp1XC
  • Stop/Tail/Indicator/Reflector
  • MaXilamp1XCWE
  • Reverse/Reflector
product Description: High brightness LEDs that are shock, dust and water proof.
part no MaXilampC1XCE MaXilamp1XC MaXilamp1XCWE
Voltage: Multivolt 12-24V Multivolt 12-24V Multivolt 12-24V
Cable: 40cm 40cm 40cm
packaging: Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.34A) (Tail-0.07A) (Ind-0.37A)
@28Volts (Stop-0.17A) (Tail-0.06A) (Ind-0.16A).
@13.8Volts (Stop-0.34A) (Tail-0.07A) (Ind-0.37A)
@28Volts (Stop-0.17A) (Tail-0.06A) (Ind-0.16A).
@13.8Volts (Rev-0.39A)
@28Volts (Rev-0.23A).
CRN: (Stop/tail 6064) (Indicator 6064) (Reflector 6445) (Reverse 1152)
Fitting: Surface mount using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 7 year warranty

 

Recessed Lamps - 130mm Diameter x 42mm high
 
 
  • 102R
  • 102RM
  • Stop/Tail
  • 102A
  • 102AM
  • Indicator
  • 102W
  • 102WM
  • Reverse
 
  • 102RC
  • Stop/Tail
  • 102AC
  • Indicator
 
product Description: The 102 series lamps are water proof, shock resistant and feature bright output with an attractive inner lens design and low profile exterior.
part no 102R 102RM 102A 102AM 102W 102WM 102RC 102AC
Voltage: 12 Volt 12-24 Volt 12 Volt 12-24 Volt 12 Volt 12-24 Volt 12 Volt 12 Volt
Cable: 36cm 36cm 36cm 36cm 36cm 36cm 36cm 36cm
packaging: Poly Bag of 1 Blister of 1 Poly Bag of 1 Blister of 1 Poly Bag of 1 Blister of 1 Poly Bag of 1 Poly Bag of 1
Current: @13.8Volts (Stop-0.34Amps) (Tail-0.04Amps) (Ind-0.61Amps) (Rev-0.27Amps) - @28Volts (Stop-TBAAmps) (Tail-TBAAmps) (Ind-TBAAmps) (Rev- TBAAmps).
C.R.n: (Stop/tail 42963) (Indicator 42832) (Reverse 42826)
Fitting: Fit into cutout (cutout 104mm round) using stick on gasket between lamp and fitting surface, run wires at back. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Recessed Lamps - 109mm Diameter x 53mm high
  • 110RM
  • 110RMB
  • Stop/Tail
  • 110AM
  • 110AMB
  • Indicator
  • 110WM
  • 110WMB
  • Reverse
product Description: The 110 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. These lamps retro fit to same shape designs. Plug (53102), grommet (53101) or bracket (53101B or 53101C) required if new installation.
part no 110RM 110RMB 110AM 110AMB 110WM 110WMB
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt
plug: Part no. 53102 Part no. 53102 Part no. 53102 Part no. 53102 Part no. 53102 Part no. 53102
packaging: Blister of 1 Poly Bag of 1 Blister of 1 Poly Bag of 1 Blister of 1 Poly Bag of 1
Current: @13.8Volts (Stop-0.23Amps) (Tail-0.08Amps) (Ind-0.16Amps) (Rev-0.21Amps) - @28Volts (Stop-0.14Amps) (Tail-0.02Amps) (Ind-0.13Amps) (Rev- 0.15Amps).
C.R.n: (Stop/tail 35299) (Indicator 35298) (Reverse 36102)
Fitting: Retro fit to existing 4 inch lamps. If new installation fit grommet or flange into cutout (Cut out 115mm round) plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Recessed Lamps - 109mm Diameter x 56mm high
 
 
  • 5570R
  • Stop/Tail
  • 5570A
  • Indicator
  • 5570W
  • Reverse
product Description: The 5570 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs. Plug (53102), grommet (53101) or bracket (53101B or 53101C) required if new installation.
part no 5570R 5570A 5570W
Voltage: 12 Volt 12 Volt 12 Volt
plug: Use part no. 53102 Use part no. 53102 Use part no. 53102
Current: @13.8Volts (Stop-0.42Amps) (Tail-0.02Amps) (Ind-0.42Amps) (Rev-0.78Amps)
Fitting: Retro fit to existing fittings if new installation fit grommet or flange into cutout (cut out 115mm diameter) plug wire into lamp and run through back then push into grommet/flange.
Compliance: DOT / SAE approved
Warranty: 5 year warranty

 

Recessed Lamps - 109mm Diameter x 56mm high
 
 
  • 5575R
  • Stop/Tail
  • 5575A
  • Indicator
  • 5575W
  • Reverse
product Description: The 5575 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs. Plug (53102), grommet (53101) or bracket (53101B or 53101C) required if new installation.
part no 5575R 5575A 5575W
Voltage: 12 Volt 12 Volt 12 Volt
plug: Use part no. 53102 Use part no. 53102 Use part no. 53102
Current: @13.8Volts (Stop-0.34Amps) (Tail-0.28Amps) (Ind-0.42Amps) (Rev-0.66Amps)
Fitting: Retro fit to existing fittings if new installation fit grommet or flange into cutout (cut out 115mm diameter) plug wire into lamp and run through back then push into grommet/flange.
Compliance: DOT / SAE approved
Warranty: 5 year warranty

 

Recessed Lamps - 109mm Diameter x 39mm high
  • 5523R
  • Stop/Tail
  • 5523A
  • Indicator
  • 5523W
  • Reverse
product Description: The 5523 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs. Plug (55062), grommet (53101) or bracket (53101B or 53101C) required if new installation.
part no 5523R 5523A 5525W
Voltage: 12 Volt 12 Volt 12 Volt
plug: Use part no. 55062 Use part no. 55062 Use part no. 55062
Current: @13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.29Amps)
Fitting: Retro fit to existing fittings if new installation fit grommet or flange into cutout (cut out 115mm diameter) plug wire into lamp and run through back then push into grommet/flange.
Compliance: DOT / SAE approved
Warranty: 5523R

 

Recessed Lamps - 139mm Diameter x 22mm high
 
 
  • 5543FR
  • Stop/Tail
  • Reflector
  • 5543FA
  • Indicator
  • Reflector
  • 5543FW
  • Reverse
  • Reflector
product Description: The 5543F series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs.
part no 5543FR 5543FA 5543FW
Voltage: 12 Volt 12 Volt 12 Volt
Cable: 26cm with plug 26cm with plug 26cm with plug
Current: @13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.26Amps)
Fitting: Retro fit to existing fittings, plug into existing loom and fix with screws through three fixing points.
Compliance: DOT / SAE approved
Warranty: 5 year warranty

 

Recessed Lamps - 140mm Diameter x 39mm high
 
  • 5513R
  • Stop/Tail
  • 5513A
  • Indicator
  • 5513W
  • Reverse
product Description: The 5513 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE.
part no 5513R 5513A 5513W
Voltage: 12 Volt 12 Volt 12 Volt
plug: Use Part number 55062 Use Part number 55062 Use Part number 55062
Current: @13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.26Amps)
Fitting: Retro fit to existing fittings, wire into existing loom and fix with screws through three fixing points.
Compliance: DOT / SAE approved
Warranty: 5 year warranty

 

Round Lamps - 177mm Diameter x 25mm high
  • 5585R
  • Stop/Tail
  • 5585A
  • Indicator
  • 5585W
  • Reverse
product Description: The 5585 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE.
part no 5585R 5585A 5585W
Voltage: 12 Volt 12 Volt 12 Volt
Cable: 20cm Hard wired 20cm Hard wired 20cm Hard wired
Current: @13.8Volts (Stop-0.30Amps) (Tail-0.07Amps) (Ind-0.33Amps) (Rev-0.31Amps)
Fitting: Retro fit to existing fittings, wire into existing loom and fix with screws through four fixing points.
Compliance: DOT / SAE approved
Warranty: 5 year warranty

 

Round Lamps - 144mm Diameter x 22mm high
  • 5543R
  • Stop/Tail
  • 5543A
  • Indicator
  • 5543W
  • Reverse
product Description: The 5543 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs.
part no 5543R 5543A 5543W
Voltage: 12 Volt 12 Volt 12 Volt
Cable: 20cm Hard wire 20cm Hard wire 20cm Hard wire
packaging: Poly bag of 1 Poly bag of 1 Poly bag of 1
Current: @13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.15Amps)
C.R.N: N/A
Fitting: Retro fit to existing fittings, wire into existing loom and fix with screws through three fixing points.
Compliance: DOT / SAE approved
Warranty: 5 year warranty

 

Side Direction Oval Lamp - 170mm x 68mm x 32mm
  • 170CAT5
  • Side Direction Indicator
  • Marker CAT5
product Description: The 170CAT5 lamps are fully submersible, shock resistant and have been reworked to be ADR compliant (except reverse lamp). Available as 12 volt only.
part no 170CAT5 170CAT5/24
Voltage: 12 Volt 24 Volt
Cable: 21cm 21cm
packaging: Blister Packaging Bulk Boxed
Current: @13.8Volts (0.265A)
@28Volts (0.12A)
Fitting: Remove bezel from assembly and surface mount horizontally to ground using screws included, then refit bezel. ADR 13/00
Compliance: ADR approved
Warranty: 5 year warranty

 

Oval Lamps - 200mm x 94mm x 28mm
  • 5437R
  • Stop/Tail
  • 5437A
  • Indicator
  • 5543W
  • Reverse No ADR
product Description: The 5437 series lamps are fully submersible, shock resistant and have been reworked to be ADR compliant (except reverse lamp). Available as 12 volt only.
part no 5437R 5437A 5437W
Voltage: 12 Volt 12 Volt 12 Volt
Cable: 20cm Hard wired 20cm Hard wired 20cm Hard wired
packaging: Poly bag of 1 Poly bag of 1 Poly bag of 1
Current: @13.8Volts (Stop-0.30Amps) (Tail-0.02Amps) (Ind-0.43Amps) (Rev-0.41Amps)
C.R.n: (Stop/tail 37675) (Indicator 37674)
Fitting: Remove chrome bezel and fix lamp onto flat surface horizontally to the ground through two screw holes, run wires from back of lamp, click bezel back into place. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR approved
Warranty: 5 year warranty

 

Recessed Lamps - 164mm x 58mm x 39mm
  • 5503R
  • Stop/Tail
  • 5503A
  • Indicator
  • 5543W
  • Reverse No ADR
part no 5503R 5503A 5505W 171mm  
Voltage: 12 Volt 12 Volt 12 Volt   61mm
Plug: Use Part number 55062 Use Part number 55062 Use Part number 55062    
Packaging: Poly bag of 1 Poly bag of 1 Poly bag of 1    
Compliance: DOT / SAE approved  
Warranty: 5 year warranty  

 

Recessed Lamps - 192mm x 83mm x 39mm
  • 5533R
  • Stop/Tail
  • 5503A
  • Indicator
  • 5543W
  • Reverse No ADR
product Description: The 5533/5535 series lamps are fully submersible. These lamps are an American design and pass DOT/S58AmEm. 39mm
part no 5533R 5533A 5535W 165mm
Voltage: 12 Volt 12 Volt 12 Volt
plug: Use Part number 55062 Use Part number 55062 58mm Use Part number 55062
packaging: Poly bag of 1 Poly bag of 1 Poly bag of 1
Current: @13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.29Amps)
Fitting: Fit lamp onto mounting surface with 4 screw points, run wire through back and plug into back of lamp.
Compliance: DOT / SAE approved
Warranty: 5 year warranty

 

 

Oblong Lamps - 191mm x 84mm x 22mm
  • 5563R
  • Stop/Tail
  • 5563A
  • Indicator
  • 5563W
  • Reverse No ADR
product Description: The 5563 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE.
part no 5563R 5563A 5563W
Voltage: 12 Volt 12 Volt 12 Volt
Cable: 15cm Hard wired 15cm Hard wired 15cm Hard wired
packaging: Poly bag of 1 Poly bag of 1 Poly bag of 1
Current: @13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.15Amps)
Fitting: Remove chrome bezel and fix to mounting surface using 4 mounting holes in lamp, run wires through back and then fit chrome bezel back onto lamp.
Compliance: DOT / SAE approved
Warranty: 5 year warranty

 

^^ Back To Top ^^