Rear Combination Lamps - Page 2

Enquire About What Other Stock And Chrome Variations Are Available

Combination Lamp - 125mm Diameter

Combination Lamp - 200mm x 50mm x 28mm
  • 200BSTIM
  • 200BSTIMB
  • Stop/Tail
  • Indicator
  • 200BSTIR48
  • 200BSTIRM
  • Stop/Tail
  • Indicator
  • Reverse
  • Non ADR/ECE Approved
  • 200CSTIM
  • Stop/Tail
  • Indicator
 
Product Description: The 100 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or medium sized
commercial vehicles. This assembly is set up with individual clip in lenses. Brackets available separately.
Part No: 100BAARRM 100BARRWM 100BARRWM 100BARRWM 100BARRWM
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt 48 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Blister of 1 Box of 1 Blister of 1 Box of 1 Box of 1
Current: BSTIM - @13.8Volts (Stop-0.29Amps) (Tail-0.09Amps) (Ind-0.19Amps) - @28Volts (Stop-0.16Amps) (Tail-0.07Amps) (Ind-0.07Amps) BSTIRM - @13.8Volts (Stop-
0.10Amps) (Tail-0.02Amps) (Ind-0.11Amps) (Rev-0.10Amps) - @28Volts (Stop-0.08Amps) (Tail-0.04Amps) (Ind-0.08Amps) (Rev-0.08Amps) @48Volts (Stop-0.41Amps)
(Tail-0.11Amps) (Ind-0.40Amps) (Rev-0.28Amps)
C.R.N: (Stop/tail 35786, 35785) (Indicator 35784) No No
Fitting: Surface mount bracket with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 200mm x 50mm x 28mm
 
 
 
  • 200BARM
  • Stop/Tail
  • Indicator
  • 200BRWM
  • Stop/Tail
  • Indicator
  • Reverse
  • 200CARM
  • Stop/Tail
  • Indicator
  • 200CRWM
  • Stop/Tail
  • Indicator
  • Reverse
Product Description: The 200 series are fully submersible, rust proof and shock resistant and feature our hexagonal pattern lens. The rear of the circuit board is fully encased in resin. Their size is designed to fit into small spaces with individual clip in lenses for easy replacement and surface mounted with no visible screws.
Part No: 200BARM 200CARM 200BRWM 200CRWM
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm 40cm 40cm 40cm
Packaging: Blister of 1 Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28Volts (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) Each lens
C.R.N: (Stop/tail 35941) (Indicator 35795) (Reverse 35796)
Fitting: Surface mount bracket onto flat surface horizontally to the ground with bolts provided, run wires through back and clip lens into place. Please refer to ADR 13/00.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 200mm x 50mm x 28mm
 
 
 
  • 207BARP
  • Stop/Tail
  • Indicator
  • 207BARP
  • Stop/Tail
  • Indicator
  • 207BARL
  • Stop/Tail
  • Indicator
  • License
  • 200BARL
  • Stop/Tail
  • Indicator
  • License
Product Description: The 200/207 series boat trailer lamps are fully submersible, shock resistant and utilize our plug in and drive away cable system or can be wired to
existing looms with 40cm of tinned copper wire in a dual protective cable. Replaceable lenses, surface mount with no visible screws.
Part No: 207BARP 207BARL 207BARLP2 200BARLPM2
Voltage: 12 Volt 12 Volt 12 Volt 12-24 Volt
Cable: 40cm 40cm 40cm 40cm
Packaging: Poly Bag of 1 Poly Bag of 1 Blister of 2 LHS/RHS Blister of 2 LHS/RHS
Current: @13.8Volts (Stop-0.18Amps) (Tail-0.07Amps) (Ind-0.17Amps) (Lic-0.02Amps) - @28Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.39Amps) (Lic-0.02Amps)
C.R.N: 12 Volt - (Stop/tail 37371) (Indicator 37350) (Licence37845) 12-24 Volt - (Stop/tail 35941) (Indicator 35795) (Licence 37844)
Fitting: Surface mount onto flat surface horizontally to the ground with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 200mm x 134mm x 28mm
 
  • 200BARRM
  • Stop/Tail
  • Indicator
  • 200BARWM
  • Stop/Tail
  • Indicator
  • Reverse
  • 200CARRM
  • Stop/Tail
  • Indicator
  • 200CARWM
  • Stop/Tail
  • Indicator
  • Reverse
Product Description: The 200 series are fully submersible, rust proof and shock resistant and feature a hexagonal pattern lens. The rear of the circuit board is fully encased
in resin. Their size is designed to fit into small spaces with individual clip in lenses for easy replacement and surface mounted with no visible screws.
Part No: 200BARRM 200CARRM 200BARWM 200CARWM
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm 40cm 40cm 40cm
Packaging: Blister of 1 Blister of 1 Blister of 1 Blister of 1
Current: @13.8V (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28V (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) Each lens
C.R.N: (Stop/tail 35941) (Indicator 35795) (Reverse 35796)
Fitting: Surface mount bracket onto flat surface horizontally to the ground with bolts provided, run wires through back and clip lens into place. Please refer to ADR 13/00.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 400mm x 92mm x 40mm
  • 207BAR4
  • Stop/Tail
  • Indicator
  • 207BARL4
  • Stop/Tail
  • Indicator
  • License
  • 200BARM4
  • Stop/Tail
  • Indicator
  • 200BARLM4
  • Stop/Tail
  • Indicator
  • License
Product Description: A unique idea giving more choice and versatility for truck and trailer applications. 4 bank combination housing either 200 or 207 series lamps also
available with a licence plate lamp, individual clip in lenses. Backing plate also available separately.
Part No: 207BAR4 207BARL4 200BARM4 200BARLM4
Voltage: 12 Volt 12 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Box of 1 Box of 1 Blister of 1 Blister of 1
Current: @13.8V (Stop-0.36Amps) (Tail-0.14Amps) (Ind-0.34Amps) (Lic-0.02Amps) - @28V (Stop-0.64Amps) (Tail-0.08Amps) (Ind-0.78Amps) (Lic-0.02Amps)
C.R.N: 12 Volt - (Stop/tail 37371) (Indicator 37350) (Licence37845) 12-24 Volt - (Stop/tail 35941) (Indicator 35795) (Licence 37844)
Fitting: Surface mount onto flat surface horizontally to the ground with stainless steel bolts provided in assembly, run cable through 12mm hole. Please refer to ADR 13/00.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 400mm x 135mm x 40mm
  • 207BAR6
  • Stop/Tail
  • Indicator
  • 200BARM6
  • Stop/Tail
  • Indicator
 
Product Description: A unique idea giving more choice and versatility for truck and trailer applications. 6 bank combination housing either 200 or 207 series lamps,
individual clip in lenses. Backing plate also available separately.
Part No: 207BAR6 200BARM6
Voltage: 12 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired
Packaging: Box of 1 Box of 1
Current: @13.8Volts (Stop-0.54Amps) (Tail-0.21Amps) (Ind-0.51Amps) - @28Volts (Stop-0.96Amps) (Tail-0.12Amps) (Ind-1.17Amps).
C.R.N: 12 Volt - (Stop/tail 37371) (Indicator 37350) 12-24 Volt - (Stop/tail 35941) (Indicator 35795)
Fitting: Surface mount onto flat surface horizontally to the ground with stainless steel bolts provided in assembly and run cable. Please refer to ADR 13/00.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 594mm x 130mm x 28mm
  • J9BARRM
  • Stop/Tail
  • Indicator
  • J9BARWM
  • Stop/Tail
  • Indicator
  • Reverse
Product Description: The 200 series Jumbo lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. They are the same dimensions as the
common three lamp jumbo. Individual clip in lenses for easy replacement, or use the J9 bracket to make your own combination.
Part No: J9BARRM J9BARWM
Voltage: 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired, loomed. 40cm Hard wired, loomed.
Packaging: Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28Volts (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps)
(Rev-0.18Amps) Each lens
C.R.N: (Stop/tail 35941) (Indicator 35795) (Reverse 35796)
Fitting: Surface mount onto flat surface horizontally to the ground with bolts provided in assembly, run loomed cable through 12mm hole. Please refer to ADR
13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 594mm x 130mm x 28mm
  • J9CARRM
  • Stop/Tail
  • Indicator
 
 
  • J9CARWM
  • Stop/Tail
  • Indicator
  • Reverse
Product Description: The 200 series Jumbo lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. They are the same dimensions as the
common three lamp jumbo. Individual clip in lenses for easy replacement, or use the J9 bracket to make your own combination.
Part No: J9CARRM J9CARWM
Voltage: 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired, loomed. 40cm Hard wired, loomed.
Packaging: Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28Volts (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps)
(Rev-0.18Amps) Each lens
C.R.N: (Stop/tail 35941) (Indicator 35795) (Reverse 35796)
Fitting: Surface mount onto flat surface horizontally to the ground with bolts provided in assembly, run loomed cable through 12mm hole. Please refer to ADR
13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 594mm x 130mm x 28mm
Flush mounted type
  • 135ARM
  • Stop/Tail
  • Indicator
Recessed grommet type
  • 135ARMG
  • Stop/Tail
  • Indicator
Product Description: The 135 series lamps are fully submersible, shock resistant, feature our diamond lens pattern and are excellent for small tight spaces. Individual push
in bracket or grommet mounted lenses for surface or recess mount with no visible screws. ADR compliant for horizontal use.
Part No: 135ARM 135ARMG
Voltage: 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired. 40cm Hard wired.
Packaging: Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.12Amps) (Tail-0.01Amps) (Ind-0.21Amps) - @28Volts (Stop-0.08Amps) (Tail-0.02Amps) (Ind-0.11Amps)
C.R.N: (Stop/tail 39847) (Indicator 39846)
Fitting: Surface mount horizontally to the ground with screws or plugs provided, run wires through back & clip lens into place. Please refer to ADR 13/00
for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Strip Lamps - 258mm x 82mm x 17mm
  • 235BAR12
  • Stop/Tail
  • Indicator
  • 235CAR12
  • Stop/Tail
  • Indicator
  • 235WAR12
  • Stop/Tail
  • Indicator
Product Description: The 235 series lamps have been released and blister packed with a twin chrome bracket that allows them to be surface mounted without the need for a cut out. The brackets are also available separately in chrome, white and black.
Part No: 235BAR12 235CAR12 235WAR12
Voltage: 12 Volt only 12 Volt only 12 Volt only
Cable: 40cm 40cm 40cm
Packaging: Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.14 Amps) (Tail-0.04 Amps) (Ind-0.16 Amps)
C.R.N: (Stop/tail 37678) (Indicator 39092)
Fitting: Surface mount bracket and lights horizontally to ground with screws provided, please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Strip Lamps - 428mm x 97mm x 22mm
  • 380BAR12
  • Stop/Tail
  • Indicator
  • 380CAR12
  • Stop/Tail
  • Indicator
Product Description: The 380 series lamps have been released and blister packed with a twin chrome bracket that allows them to be surface mounted without the need for a cut out. The brackets are also available separately in chrome, white and black.
Part No: 380BAR12 380CAR12
Voltage: 12 Volt only 12 Volt only
Cable: 40cm 40cm
Packaging: Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.16 Amps) (Tail-0.04 Amps) (Ind-0.18 Amps)
C.R.N: (Stop/tail 39473) (Indicator 39470)
Fitting: Surface mount bracket and lights horizontally to ground with screws provided, please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 140mm round x 66mm depth
  • 140STIM
  • Stop/Tail
  • Indicator
  • 140STILM
  • Stop/Tail
  • Indicator
Product Description: The 380 series lamps have been released and blister packed with a twin chrome bracket that allows them to be surface mounted without the need for a cut out. The brackets are also available separately in chrome, white and black.
Part No: 140STIM 140STILM
Voltage: 12-24 Volt 12-24 Volt
Compliance: ECE approved

 

Combination Lamp - 470mm x 70mm x 40mm
  • 135CARRM
  • Stop/Tail
  • Indicator
  • 135CARWMR
  • Stop/Tail
  • Indicator
  • Reverse
  • 135CARWML
  • Stop/Tail
  • Indicator
  • Reverse
Product Description: The 135 series lamps are fully submersible, shock resistant and feature our diamond lens pattern, excellent for small tight spaces. Mounted into chrome plated triple “L” bracket, two combinations available.
Part No: 135CARRM 135CARWMR 135CARWML
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Box of 1 Box of 1 Right hand side Box of 1 Left hand side
Current: @13.8Volts (Stop-0.11Amps) (Tail-0.02Amps) (Ind-0.16Amps) (Rev-0.23Amps) - @28Volts (Stop-0.08Amps) (Tail-0.02Amps) (Ind-0.06Amps) (Rev-
0.19Amps).
C.R.N: (Stop/tail 39848) (Indicator 39845) (Reverse 39849)
Fitting: Fix L bracket horizontally to the ground with lamps using three fixing points at top of bracket, hard wired. Refer to ADR 13/00 for mounting instructions.
Compliance: 5 year warranty
Warranty: ADR / ECE approved

 

Combination Lamp - 390mm x 150mm x 44mm
  • LUMILAMPLB
  • LUMILAMPRB
  • Stop/Tail
  • Indicator
  • Reverse
  • Reflector
Product Description: The New LUMILAMPS are fully submersible, shock resistant and features a new stylish design. All five functions are standard with this lamp. Left and Right side available.
Part No: LUMILAMP2 (Twin pack) LUMILAMPLB - Left LUMILAMPRB - Right
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Blister hang/stand & carry pack left/right sides Box of 1 Left hand side Box of 1 Right hand side
Current: @13.8Volts (Stop-0.55Amps) (Tail-0.51Amps) (Ind-0.58Amps) (Rev-0.48Amps) - @28Volts (Stop-0.27Amps) (Tail-0.26Amps) (Ind-0.27Amps) (Rev-
0.32Amps).
C.R.N: (Stop/tail 42101) (Indicator 42103) (Reverse 41986) (Reflector 42102)
Fitting: Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

 

Combination Lamp - 125mm Diameter
  • MaXilamp1XRE
  • Stop/Tail
  • Indicator
Product Description: These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids
and enhanced UV protection against fading
Part No: LUMILAMP2 (Twin pack)
Voltage: 12-24 Volt
Cable: 40cm Sheathed tinned copper wire.
Packaging: Blister pack of 1
Current: @13.8Volts (Stop-0.34Amps) (Tail-0.07Amps) (Ind-0.37Amps) @28Volts (Stop-0.17Amps) (Tail-0.06Amps) (Ind-0.16Amps)
C.R.N: Complies with A.D.R under E.C.E approval. E9 02 R1-S1 01 2a Component number 6064
Fitting: Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 7 year warranty

 

Combination Lamp - 390mm x 150mm x 44mm
  • MaXilamp3XR
  • MaXilamp3XRB
  • MaXilamp3XRR
  • Stop/Tail
  • Indicator
  • Reverse
  • Reflex Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully
encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids
and enhanced UV protection against fading.
Part No: MaXilamp3XRR MaXilamp3XR MaXilamp3XRB
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Blister of 1 Blister of 1 Blister of 1
Current: 3XR - @13.8V (Stop-0.54Amps) (Tail-0.08Amps) (Ind-0.77Amps) (Rev-0.67Amps) - @28V (Stop-0.27Amps) (Tail-0.04Amps) (Ind-0.35Amps) (Rev-0.34Amps).
C.R.N: (Stop/tail 40963) (Ind 40962) (Rev 40961) (Ref 38102)
Fitting: Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR approved
Warranty: 7 year warranty

 

Combination Lamp - 600mm x 135mm x 40mm
  • MaXilamp5XRR
  • MaXilamp5XR
  • MaXilamp5XRB
  • Stop/Tail
  • Indicator
  • Reverse
  • Reflex Reflector
 
Product Description: These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids
and enhanced UV protection against fading.
Part No: MaXilamp5XRR MaXilamp5XR MaXilamp5XRB
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Blister of 1 Blister of 1 Blister of 1
Current: @13.8V - 5XR-5XRR (Stop-1.12Amps) (Tail-0.09Amps) (Ind-0.62Amps) (Rev-0.08Amps) @ 28V - 5XR-5XRR (Stop-0.73Amps) (Tail-0.04Amps) (Ind-0.31Amps) (Rev-0.36Amps)
C.R.N: (Stop/tail 40966) (Indicator 40964) (Reverse 40965) (Reflector 38102)
Fitting: Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR approved
Warranty: 7 year warranty
Combination Lamp - 125mm Diameter
  • MaXilamp1XC
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully
encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids
and enhanced UV protection against fading
Part No: MaXilamp1XC
Voltage: 12-24 Volt
Cable: 40cm Sheathed tinned copper wire.
Packaging: Blister pack of 1
Current: @13.8Volts (Stop-0.34Amps) (Tail-0.07Amps) (Ind-0.37Amps) @28Volts (Stop-0.17Amps) (Tail-0.06Amps) (Ind-0.16Amps)
C.R.N: Complies with A.D.R under E.C.E approval. E9 02 R1-S1 01 2a Component number TBA
Fitting: Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 7 year warranty

 

Combination Lamp - 600mm x 135mm x 40mm
  • MaXilamp5XC
  • MaXilamp5XCW
  • Stop/Tail
  • Indicator
  • Reflector
  • Reflex Reflector
 
Product Description: These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids
and enhanced UV protection against fading.
Part No: MaXilamp5XC MaXilamp5XCW
Voltage: 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired
Packaging: Blister of 1 Blister of 1
Current: @13.8V - (Stop-1.12Amps) (Tail-0.09Amps) (Ind-0.62Amps) (Rev-0.08Amps) @ 28V - (Stop-0.73Amps) (Tail-0.04Amps) (Ind-0.31Amps) (Rev-0.36Amps)
C.R.N: (Stop/tail 42689) (Indicator 42683) (Reverse 42684) (Reflector 42507)
Fitting: Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR approved
Warranty: 7 year warranty

 

^^ Back To Top ^^

<< Previous Page <<