Rear Combination Lamps - Page 1

Enquire About What Other Stock And Chrome Variations Are Available

Combination 4 Square Lamp - 420mm x 95mm x 28mm
  • 420AARRM
  • Stop/Tail
  • Indicator
  • Reflector
  • 420ARRWM
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: These lamps are individual lens replacements which are fully submersible, rust proof, shock resistant and feature square lens designs.
Part No: 420AARRM 420ARRWM
Voltage: Multivolt 12-24V Multivolt 12-24V
Cable: 1.2m 1.2m
Packaging: Blister Packaging Blister Packaging
Current: @13.8Volts (Stop-0.30A) (Tail-0.04A) (Ind-0.28A)
@28Volts (Stop-0.22A) (Tail-0.06A) (Ind-0.22A)
@13.8Volts (Stop-0.30A) (Tail-0.04A) (Ind-0.14A) (Rev-0.17A)
@28Volts (Stop-0.22A) (Tail-0.06A) (Ind-0.11A) (Rev-0.13A)
Fitting: Surface mount onto flat surface horizontally with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00.
Compliance: ADR Approved
Warranty : 5 years

 

Combination 90° Angle Bracket Lamp - 280mm x 110mm x 29mm
  • 80BARRSKT
  • Stop/Tail
  • Indicator
  • 80BARWSKT
  • Stop/Tail
  • Indicator
  • Reverse
Product Description: These lamps are individual lens replacements which are fully submersible, rust proof, shock resistant and feature square lens designs.
Part No: 80BARRSKT 80BARRWSKT
Voltage: 12V 12V
Cable: 40cm 40cm
Packaging: Blister Twin Packaging Blister Twin Packaging
Current: @13.8Volts (Stop-0.33A) (Tail-0.06A) (Ind-0.29A)
@28Volts (Stop-0.25A) (Tail-0.04A) (Ind-0.22A)
@13.8Volts (Stop-0.33A) (Tail-0.06A) (Ind-0.29A) (Rev-0.17A)
@28Volts (Stop-0.25A) (Tail-0.04A) (Ind-0.22A) (Rev-0.21A)
C.R.N: (Stop/Tail - 33059) (Indicator - 33098) (Reverse - 35797)
Fitting: Mount 90˚ bracket to the underside of vehicle horizontally to the ground with screws provided. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE Approved
Warranty : 5 years

 

Combination Square Series Lamp - 275mm x 100mm x 33mm
  • 282ARRM
  • 282ARRMB
  • Stop/Tail
  • Indicator
  • Reverse
  • With Reflector
  • 282ARWM
  • 282ARWMB
  • Stop/Tail
  • Indicator
  • Reverse
  • With Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant and feature square lens designs.
Part No: 282ARRM
282ARRMB
282ARWM
282ARWMB
Voltage: Multivolt 12-24V Multivolt 12-24V
Cable: 20cm 20cm
Packaging: Blister Packaging Blister Packaging
Current: @13.8Volts (Stop-0.23A) (Tail-0.04A) (Ind-0.22A) (Rev-0.16A)
@28Volts (Stop-0.12A) (Tail-0.04A) (Ind-0.12A) (Rev-0.09A)
@13.8Volts (Stop-0.23A) (Tail-0.04A) (Ind-0.22A) (Rev-0.16A)
@28Volts (Stop-0.12A) (Tail-0.04A) (Ind-0.12A) (Rev-0.09A)
C.R.N: (Stop/Tail - 43223) (Indicator - 43221) (Reverse - 43222) (Reflector - 1472)
Fitting: Horizontally surface mount using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE Approved
Warranty : 5 years

 

Combination Lamp - 100mm x 100mm x 22mm
  • 101BAR
  • 101BAR2
  • Stop/Tail
  • Indicator
  • Reflector
  • 101BARLP
  • Stop/Tail
  • Indicator
  • Reflector
  • Licence
  • 101BAR10
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant and feature our square lens pattern with 8 high brightness LEDs.
Part No: 101BAR 101BAR2 101BAR10 101BARLP2
Voltage: 12 Volt 12 Volt 12 Volt 12 Volt
Cable: 40cm 40cm 10 metre cable 40cm
Packaging: Box Blister of 2 Poly Bag Blister of 2 with licence
Current: @13.8Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.12Amps) (Licence-0.03 Amps)
C.R.N: This lamp complies with ADR under ECE R1-S1-E9-02, 2a-E9-01, IA-E9-02 (Component number 6444), Licence (L 00 Component number 6110, 6134)
Fitting: Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface.
Please refer to ADR 13/00 for mounting instructions.
Compliance: ECE Approved
Warranty : 5 years

 

Combination Lamp - 150mm x 80mm x 22mm
  • 151BAR
  • 151BAR2
  • Stop/Tail
  • Indicator
  • Reflector
  • 151BARLP
  • Stop/Tail
  • Indicator
  • Reflector
  • Licence
  • 151BAR10
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant and feature our square lens pattern with 8 high brightness LEDs.
Part No: 151BAR 151BAR2 151BAR10 151BARLP2
Voltage: 12 Volt 12 Volt 12 Volt 12 Volt
Cable: 40cm 40cm 10 metre cable 40cm
Packaging: Box Blister of 2 Poly Bag Blister of 2 with licence
Current: @13.8Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.12Amps) (Licence-0.03 Amps)
C.R.N: This lamp complies with ADR under ECE R1-S1-E9-02, 2a-E9-01, IA-E9-02 (Component number 6444), Licence (L 00 Component number 6110, 6134)
Fitting: Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface.
Please refer to ADR 13/00 for mounting instructions.
   

 

Combination Lamp - 150mm x 80mm x 22mm
  • 153BAR2
  • Stop/Tail
  • Indicator
  • Reflector
  • 153BAR
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: LED Technologies are proud to release the 153 series rear combination trailer lamps. Specially designed for the budget conscious consumer they feature 8 high powered LEDs with a new hardened acrylic round lens design and ABS base, making them a true all round performer. These lamps are fully sealed against water and dust ingress, are shock resistant and have stainless steel fittings with tinned copper wire for added protection and will suit many trailer applications. LED Technologies offer a 5 year warranty and a highly competitive price which is comparable to globe type lamps, ensuring you will not be disappointed with your choice.
Part No: 153BAR 153BAR2
Voltage: 12 Volt 12 Volt
Cable: 40cm 40cm
Packaging: Box Blister of 2
Current: @13.8Volts (Stop-0.07Amps) (Tail-0.01Amps) (Ind-0.06Amps)
C.R.N: (Stop/tail TBA) (Indicator TBA) (Reflex Reflector 38102)
Fitting: Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface.
Please refer to ADR 13/00 for mounting instructions.
Compliance: ECE approved
Warranty: 5 years

 

Combination Lamp - 150mm x 80mm x 22mm
  • 155BAR2
  • Stop/Tail
  • Indicator
  • Reflector
  • 155BAR
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: LED Technologies are proud to release the 155 series rear combination trailer lamps. Specially designed for the budget conscious consumer they feature 8 high powered LEDs with a new hardened acrylic honeycomb lens design and ABS base, making them a true all round performer. These lamps are fully sealed against water and dust ingress, are shock resistant and have stainless steel fittings with tinned copper wire for added protection and will suit many trailer applications. LED Technologies offer a 5 year warranty and a highly competitive price which is comparable to globe type lamps, ensuring you will not be disappointed with your choice.
Part No: 155BAR 155BAR2
Voltage: 12 Volt 12 Volt
Cable: 40cm 40cm
Packaging: Box Blister of 2
Current: @13.8Volts (Stop-0.07Amps) (Tail-0.01Amps) (Ind-0.06Amps)
C.R.N: (Stop/tail 44015) (Indicator 44016) (Reflex Reflector 38102)
Fitting: Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface.
Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR approved
Warranty: 5 years

 

Combination Lamp - 278mm x 100mm x 28mm

  • 100BAR
  • 100BAR2
  • 100ARM
  • Stop/Tail
  • Indicator
  • Reflector

  • 100BARB Black PCB
  • Stop/Tail
  • Indicator
  • Reflector

  • 100BARLP
  • Stop/Tail
  • Indicator
  • Reflector
  • Licence

  • 100BAR10
  • 100ARM10
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant and feature our diamond lens pattern. The circuit board is fully encased in resin with corrosion protected tinned copper wiring. Specially designed male & female 4 pin plugs, compatible with the plug in and drive away cable system.
Part No: 100BAR 100BARB 100BAR2 100BAR10 100BARLP2 100ARM 100ARM10  
Voltage: 12 Volt 12 Volt 12 Volt 12 Volt 12 Volt 12-24 Volt 12-24 Volt  
Cable: 40cm with plugs 40cm with plugs 40cm with plugs 10 metre cable 40cm with plugs 40cm with plugs 10 metre cable  
Packaging: Box Box Blister of 2 Poly Bag Blister of 2 & License Blister of 1 Poly Bag  
Current: @13.8Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.12Amps) (Licence-0.03 Amps) - @28Volts (Stop-0.12Amps) (Tail-0.06Amps) (Ind-0.07Amps)
C.R.N: (Stop/tail 37986) (Indicator 37985) (Reflex Reflector 38102) Licence (L 00 Component number 6134)
Fitting: Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface.
Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: Lifetime warranty

 

Combination Lamp - 150mm x 80mm x 24mm

  • 150BAR
  • 150BAR2
  • 150ARM
  • Stop/Tail
  • Indicator
  • Reflector

  • 150BARB Black PCB
  • Stop/Tail
  • Indicator
  • Reflector

  • 150BARLP
  • Stop/Tail
  • Indicator
  • Reflector
  • Licence

  • 150BAR10
  • 150ARM10
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant and feature our diamond lens pattern. The circuit board is fully encased in resin with
corrosion protected tinned copper wiring. Specially designed male & female 4 pin plugs, compatible with the plug in and drive away cable system.
Part No: 150BAR 150BARB 150BAR2 150BAR10 150BARLP2 150ARM 150ARM10  
Voltage: 12 Volt 12 Volt 12 Volt 12 Volt 12 Volt 12-24 Volt 12-24 Volt  
Cable: 40cm with plugs 40cm with plugs 40cm with plugs 10 metre cable 40cm with plugs 40cm with plugs 10 metre cable  
Packaging: Box Box Blister of 2 Poly Bag Blister of 2 & License Blister of 1 Poly Bag  
Current: @13.8Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.12Amps) (Licence-0.03 Amps) - @28Volts (Stop-0.12Amps) (Tail-0.06Amps) (Ind-0.07Amps)
C.R.N: (Stop/tail 37381) (Indicator 37380) (Reflex Reflector 38102) Licence (L 00 Component number 6110)
Fitting: Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface.
Please refer to ADR 13/00 for mounting instructions.
Compliance ADR / ECE approved
Warranty: Lifetime warranty

 

Combination Lamp - 275mm x 100mm x 22mm
 
  • 275BAR - 12 volt
  • 275BAR2 - 12 volt
  • 275ARM - 12-24 volt
  • Stop/Tail
  • Indicator
  • Reflector
 

  • 275BARB - 12 volt Black PCB
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant and feature our diamond lens pattern. The circuit board is fully encased in resin with
corrosion protected tinned copper wiring. Specially designed male & female 4 pin plugs, compatible with the plug in and drive away cable system.
Part No: 275BAR 275BARB 275BAR2 275ARM
Voltage: 12 Volt 12 Volt 12 Volt 12-24 Volt
Cable: 40cm with plugs 40cm with plugs 40cm with plugs 40cm with plugs
Packaging: Box Box Blister of 2 Blister of 1
Current: @13.8Volts (Stop-0.14Amps) (Tail-0.07Amps) (Ind-0.10Amps) - @28Volts (Stop-0.11Amps) (Tail-0.05Amps) (Ind-0.12Amps)
C.R.N: (Stop/tail 38658) (Indicator 38657) (Reflex Reflector 38102)
Fitting: Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface.
Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE Approved
Warranty: Lifetime warranty

 

Combination Lamp - 275mm x 100mm x 33mm
  • 275GARWM
• Stop/Tail
• Indicator
• Reverse
• Reflector
  • 275RARWM
• Stop/Tail
• Indicator
• Reverse
• Reflector
Product Description: Our own product proudly designed and made in Australia from high quality components, we consider this light to be the best in the Australian market. Our reputation is on the line.
Part No 275GARWM - Grey Frame 275RARWM - Red Frame
Voltage: 12-24 Volt 12-24 Volt
Cable: 40cm 40cm
Packaging: Blister Blister
Current: TBA
C.R.N: (Stop/tail 43223) (Indicator 43221) (Reverse 43222) (Reflex Reflector 38102)
Fitting: Surface mount onto flat surface horizontally to the ground using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR approved
Warranty: 5 year warranty

 

Combination Lamp - 250mm x 80mm x 24mm
  • 250ARWM
• 250ARWMB
• Stop/Tail
• Indicator
• Reverse
• Reflector
• 250RARM
• 250RARMB
• Stop/Tail
• Indicator
• Reflector
Product Description: These lamps are fully submersible, rust proof, shock resistant and feature our diamond lens pattern. The circuit board is fully encased in resin with corrosion protected tinned copper wiring. Same lens design as our popular 150 series.
Part No 250ARWM 250ARWMB 250RARM 250RARMB
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm 40cm 40cm 40cm
Packaging: Blister Bulk Blister Bulk
Current: TBA
C.R.N: This lamp complies with ADR with ECE approval (Stop/tail 43362) (Indicator 43361) (Reflex Reflector 38102)
Fitting: Surface mount onto flat surface horizontally to ground using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE Approved
Warranty: 5 year warranty

 

Combination Lamp - 400mm x 130mm x 45mm
product Description: The J3 series Jumbo lamps are water proof and shock resistant, with classic styling, modern aesthetic appeal and featuring a specially designed inner chrome reflector. Individual lenses are available separately for replacement. These lamps are ADR approved for horizontal or vertical mount.
part no J3BARM
Voltage: 12-24 Volt
Cable: 1.2 metre sheathed hard wired
packaging: Blister carry pack of 1
Current: @13.8Volts 1.80Amps - @28Volts 0.78Amps
C.R.n: (Stop/tail 42965) (Indicator 42964) (Reflector 42966)
Fitting: Surface mount onto flat surface horizontally or vertically using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR approved
Warranty: 5 years warranty

 

Jumbo Combination Lamp - 595mm x 130mm x 45mm
  • J3BARRM
• Stop/Tail
• Indicator
• Reflector
  • J3BARWM
• Stop/Tail
• Indicator
• Reverse
• Reflector
product Description: The J3 series Jumbo lamps are water proof and shock resistant, with classic styling, modern aesthetic appeal and featuring a specially designed inner chrome reflector. Individual lenses are available separately for replacement. These lamps are ADR approved for horizontal or vertical mount. Soon to be released in triple red configuration.
part no J3BARRM J3BRRRM J3BARWM
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 1.2 metre sheathed hard wired 1.2 metre sheathed hard wired 1.2 metre sheathed hard wired
packaging: Blister carry pack of 1 Blister carry pack of 1 Blister carry pack of 1
Current: @13.8Volts 1.80Amps - @28Volts 0.78Amps @13.8Volts TBAAmps - @28Volts TBAAmps @13.8Volts 1.00Amps - @28Volts 0.48Amps
C.R.n: (Stop/tail 42965) (Indicator 42964) (Reverse 42967) (Reflector 42966)
Fitting: Surface mount onto flat surface horizontally or vertically using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR approved
Warranty: 5 years warranty

 

Replacement inserts - 194mm x 123mm x 30mm
     
• J3RM
• Stop/Tail
• Reflector
• J3AM
• Indicator
• Reflector
• J3WM
• Reverse
• Reflector
Product Description: The J3 series Jumbo lamps are water proof and shock resistant, with classic styling, modern aesthetic appeal and featuring a specially designed inner chrome reflector. Individual lenses are available separately for replacement. These lamps are ADR approved for horizontal or vertical mount.
Compliance: ADR approved
Warranty: 5 year warranty

 

Combination Lamp - 100mm x 100mm x 28mm
  • 80BSTIM
  • 80BSTIMB
  • Stop/Tail
  • Indicator
  • 80CSTIM
  • Stop/Tail
  • Indicator
Product Description: The 80 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized
commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.
Part No: 80BSTIM 80BSTIMB 80CSTIM
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm 40cm 40cm
Packaging: Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.33Amps) (Tail-0.06Amps) (Ind-0.31Amps)(Rev-0.29Amps)
@28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps) (Rev-0.21Amps)
C.R.N: Combination lamp (Stop 35788) (tail 35789) (Indicator 35787)
Fitting: Surface mount bracket, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 122mm x 122mm x 31mm
  • 100BSTIM
  • 100BSTIMB
  • Stop/Tail
  • Indicator
  • 100CSTIM
  • Stop/Tail
  • Indicator
Product Description: The 100 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized
commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.
Part No: 100BSTIM 100CSTIM
Voltage: 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired
Packaging: Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.17Amps) (Tail-0.04Amps) (Ind-0.18Amps)
@28Volts (Stop-0.14Amps) (Tail-0.04Amps) (Ind-0.11Amps)
C.R.N: (Stop 35781) (tail 35782) (Indicator 35783)
Fitting: Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 147mm x 147mm x 31mm
  • 125BSTIM
  • 125BSTIMB
  • Stop/Tail
  • Indicator
 

  • 125CSTIM
  • Stop/Tail
  • Indicator
 
Product Description: The 125 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized
commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.
Part No: 125BSTIM 125BSTIMB 125CSTIM
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-TBAAmps) (Tail-TBAAmps) (Ind-TBAAmps)
@28Volts (Stop-TBAAmps) (Tail-TBAAmps) (Ind-TBAAmps)
C.R.N: (Stop TBA) (tail TBA) (Indicator TBA)
Fitting: Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 188mm x 100mm x 28mm
  • 80BAR
  • 80BARM
  • Stop/Tail
  • Indicator
  • 80CAR
  • 80CARM
  • Stop/Tail
  • Indicator
Product Description: The 80 series lamps are fully submersible, rust proof and shock resistant and feature our hexagonal pattern lens. The rear of the circuit board is fully
encased in resin. Individual clip in lenses for easy replacement.
Part No: 80BAR 80CAR 80BARM 80CARM
Voltage: 12 Volt 12 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hardwired 40cm Hardwired 40cm Hardwired 40cm Hardwired
Packaging: Blister of 1 Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.33Amps) (Tail-0.06Amps) (Ind-0.31Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps)
C.R.N: (Stop/tail 33059) (Indicator 33098)
Fitting: Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer
to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 340mm x 200mm x 60mm
 
  • 125BARML- Left Side
  • Stop/Tail
  • Indicator
  • Reflector
  • 125BARMR - Right Side
  • Stop/Tail
  • Indicator
  • Reflector
Product Description: The 125 series lamps are fully submersible, shock resistant, feature our hexagonal lens pattern. Specifically designed for retro fit to same type
commercial vehicles. This assembly has individual clip in lenses for easy replacement.
Part No: 125BARML 125BARMR
Voltage: 12-24 Volt 12-24 Volt
Cable: 16cm loomed and sheathed from outer casing. 16cm loomed and sheathed from outer casing.
Packaging: Box Box
Current: @13.8Volts (Stop-0.42Amps) (Tail-0.04Amps) (Ind-0.43Amps) - @28Volts (Stop-0.26Amps) (Tail-0.06Amps) (Ind-0.26Amps)
C.R.N: (Stop/tail 33403) (Indicator 33165) (Reflex Reflector 38102)
Fitting: Secure horizontally to the ground using top or back mounting holes in assembly and run wires through back. Refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 278mm x 100mm x 28mm

  • 80BARR - 12 volt
  • 80BARRM - multivolt
  • Stop/Tail
  • Indicator

  • 80CARR - 12 volt
  • 80CARRM - multivolt
  • Stop/Tail
  • Indicator

  • 80BARW - 12 volt
  • 80BARWM - multivolt
  • Stop/Tail
  • Indicator

  • 80CARW - 12 volt
  • 80CARWM - multivolt
  • Stop/Tail
  • Indicator
 
Product Description: The 80 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. The rear of the circuit board is fully encased in
resin. Individual clip in lenses for easy replacement, surface mount with no visible screws. Specifically designed for trailers or small sized commercial
vehicles.
Part No: 80BARR 80BARW 80BARRM 80BARWM 80CARR 80CARW 80CARRM 80CARWM
Voltage: 12 Volt 12 Volt 12-24 Volt 12-24 Volt 12 Volt 12 Volt 12-24 Volt 12-24 Volt
Cable: 40cm 40cm 40cm 40cm 40cm 40cm 40cm 40cm
Packaging: Blister of 1 Blister of 1 Blister of 1 Blister of 1 Blister of 1 Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.33Amps) (Tail-0.06Amps) (Ind-0.29Amps) (Rev-0.17Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps)
(Rev-0.21Amps) Each lens
C.R.N: (Stop/tail 33059) (Indicator 33098) (Reverse 35797)
Fitting: Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer
to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

 

Combination Lamp - 350mm x 120mm x 31mm

  • 100BARRM - 12 volt
  • Stop/Tail
  • Indicator

  • 100CARRM - 12 volt
  • Stop/Tail
  • Indicator

  • 100BARWM - 12 volt
  • Stop/Tail
  • Indicator

  • 100CARWM - 12 volt
  • Stop/Tail
  • Indicator
 
Product Description: The 100 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or medium sized commercial vehicles. Individual clip in lenses allow easy replacement and surface mounted with no visible screws.
Part No: 100BARRM 100CARRM 100BARWM 100CARWM
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Blister of 1 Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.38Amps) (Tail-0.04Amps) (Ind-0.38Amps) (Rev-0.31Amps) - @28Volts (Stop-0.24Amps) (Tail-0.07Amps) (Ind-0.23Amps) (Rev-0.17Amps) Each lens
C.R.N: (Stop/tail 33402) (Indicator 33156) (Reverse 35793)
Fitting: Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 435mm x 145mm x 31mm

  • 125BARRM
  • Stop/Tail
  • Indicator

  • 125CARRM
  • Stop/Tail
  • Indicator

  • 125BARWM
  • Stop/Tail
  • Indicator

  • 125CARWM
  • Stop/Tail
  • Indicator
 
Product Description: The 125 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern specifically designed for trailers or medium sized commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.
Part No: 125BARRM 125CARRM 125BARWM 125CARWM
Voltage: 12-24 Volt 12-24 Volt 12-24 Volt 12-24 Volt
Cable: 40cm Hard wired 40cm Hard wired 40cm Hard wired 40cm Hard wired
Packaging: Blister of 1 Blister of 1 Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.42Amps) (Tail-0.04Amps) (Ind-0.43Amps) (Rev-0.36Amps) - @28Volts (Stop-0.26Amps) (Tail-0.06Amps) (Ind-0.25Amps) (Rev-0.18Amps) Each lens
C.R.N: (Stop/tail 33403) (Indicator 33165) (Reverse 35794)
Fitting: Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 350mm x 105mm x 48mm
  • 80BAARRM
  • Stop/Tail
  • Indicator
  • 80BARRWM
  • Stop/Tail
  • Indicator
  • Reverse
Product Description: The 80 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized
commercial vehicles. This assembly is loomed up with individual clip in lenses. Brackets available separately.
Part No: 80BAARRM 80BARRWM
Voltage: 12-24 Volt 12-24 Volt
Cable: 40cm Hardwired 40cm Hardwired
Packaging: Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.38Amps) (Tail-0.04Amps) (Ind-0.38Amps) (Rev-0.31Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps) (Rev-
0.21Amps) Each lens.
C.R.N: (Stop/tail 33059) (Indicator 33098) (Reverse 35797)
Fitting: Surface mount assembly onto flat surface horizontally to the ground with bolts provided, run wires through back. Please refer to ADR 13/00 for
mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

Combination Lamp - 430mm x 125mm x 50mm
  • 100BAARRM
  • Stop/Tail
  • Indicator
  • 100BARRWM
  • Stop/Tail
  • Indicator
  • Reverse
Product Description: The 100 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or medium sized
commercial vehicles. This assembly is set up with individual clip in lenses. Brackets available separately.
Part No: 100BAARRM 100BARRWM
Voltage: 12-24 Volt 12-24 Volt
Cable: 40cm Hardwired 40cm Hardwired
Packaging: Blister of 1 Blister of 1
Current: @13.8Volts (Stop-0.38Amps) (Tail-0.04Amps) (Ind-0.38Amps) (Rev-0.29Amps) - @28Volts (Stop-0.24Amps) (Tail-0.07Amps) (Ind-1.23Amps) (Rev-0.17Amps). Each lens.
C.R.N: (Stop/tail 33402) (Indicator 33156) (Reverse 35793)
Fitting: Surface mount assembly onto flat surface horizontally to the ground with bolts provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.
Compliance: ADR / ECE approved
Warranty: 5 year warranty

 

^^ Back To Top ^^

›› Next Page ››