Marker Lamps
Enquire About What Other Stock And Chrome Variations Are Available
Clearance / Marker
![]() |
![]() |
![]() |
Part No | EA26259CA | EA26259CAR | EA26259CR | EA26259CW | |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | |
Description | Side directional indicator/Cab marker | Side Marker | Rear Position/Outline Marker | Front Position/Outline Marker | |
Colour: | Amber | Red/Amber | Red | White | |
Cable: | 15cm | ||||
Compliance: | ADR approved | ||||
Warranty: | Lifetime |
37 Series Marker Lamps - 70mm x 35mm x 20mm
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
|
|
Product Description: | The 37 series marker lamps are fully submersible, shock resistant with an oval shape and design. No screws or rivets, just a serrated plug, plastic injected into the base. The size of this plug is 6.1mm outer round diameter which when pushed into a 6mm round hole provides a tight secure fitment, and double sided tape shaped in the rear of the lamp with easy peel off protective cover. | |||||||
Part no | 37RM2P - Blister Single 37RMB2P - Bulk Poly Bag 37RMB3 - 3m Cable/BP Bag |
37AM2P - Blister Single 37AMB2P - Bulk Poly Bag 37AMB3 - 3m Cable, BP Bag |
37ARM2P - Blister Single 37ARMB2P - Bulk Poly Bag 37ARM3 - 3m Cable, BP Bag |
37WM2P - Blister Single 37WMB2P - Bulk Poly Bag 37WM3 - 3m Cable, BP Bag |
||||
Voltage: | Multivolt 12-24V | Multivolt 12-24V | Multivolt 12-24V | Multivolt 12-24V | ||||
Cable: | 10cm | 10cm | 10cm | 10cm | ||||
Packaging: | Blister of 1 | Blister of 1 | Blister of 1 | Blister of 1 | ||||
Current: | @13.8Volts - 0.04A @28Volts - 0.04A |
|||||||
C.R.N: | (Rear Position TBA) (Side Direction Indicator TBA) (Side marker TBA) (Front position TBA) | |||||||
Fitting: | Drill two 6mm holes for serrated plugs and one 8mm hole or larger for the cable. Remove the 3M protective film from the back of the lamp and simply push into place. Please refer to ADR 13/00 for mounting instructions. | |||||||
Compliance: | ADR / ECE approved | |||||||
Warranty: | 5 year warranty |
35 Series Marker Lamps - 58mm x 35mm x 21mm
Product Description: | The 35 series marker lamps are fully submersible, shock resistant, feature our hexagonal lens pattern, and have a slimline design. Individual clip in lenses allow easy surface mount with no visible screws. | |||
Part No, Packaging | 35RM - Blister | 35AM - Blister | 35ARM - Blister | 35WM - Blister |
35RMB - Bulk | 35AMB - Bulk | 35ARMB - Bulk | 35WMB - Bulk | |
35CRM - Blister | 35CAM - Blister | 35CARM - Blister | 35CWM - Blister | |
35CRMB - Bulk | 35CAMB - Bulk | 35CARMB - Bulk | 35CWMB - Bulk | |
35RM2 - Bulk | 35AM2 - Bulk | 35ARM2 - Bulk | 35WM2 - Bulk | |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt |
Cable: | 40cm standard, 2 metre available | 40cm standard, 2 metre available | 40cm standard, 2 metre available | 40cm standard, 2 metre available |
Current: | @13.8Volts (Red-0.12Amps) (Amber-0.10Amps) (Amber/Red-0.10Amps) (White-0.05Amps) @28Volts (Red-0.07Amps) (Amber-0.07Amps) (Amber/Red-0.07Amps) (White-0.04Amps) | |||
C.R.N: | (Rear Position 34007) (Side Direction Indicator 33894) (Side marker 34099) (Front position 34008) | |||
Fitting: | Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. | |||
Compliance: | ADR / ECE approved | |||
Warranty: | 5 year warranty |
42 Series Marker Lamps - 74mm x 38mm x 35mm
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
|
|
|
![]() |
![]() |
![]() |
![]() |
|
|
|
|
|
Product Description: | The 42 series marker lamps are fully submersible, shock resistant with a classic shape and design. Individual clip in lenses allow easy surface mount or retro fit, with no visible screws. | |||||||
Part No | 42RMB | 42CRMB | 42AMB | 42CAMB | 42ARMB | 42CARMB | 42WMB | 42CWMB |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt |
Cable: | 16cm | 16cm | 16cm | 16cm | 16cm | 16cm | 16cm | 16cm |
Packaging: | Box of 10 | Box of 10 | Box of 10 | Box of 10 | Box of 10 | Box of 10 | Box of 10 | Box of 10 |
Current: | @13.8Volts (Red-0.05Amps) (Amber-0.05Amps) (Amber/Red-0.05Amps) (White-0.03Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.03Amps) | |||||||
C.R.N: | (Rear Position 42839) (Side Direction Indicator 42836) (Side marker 42837) (Front position 42840) | |||||||
Fitting: | Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. | |||||||
Compliance: | ADR / ECE approved | |||||||
Warranty: | 5 year warranty |
58 Series Marker Lamps - 58mm x 35mm x 21mm
Description: | The 58 series lamps are water proof, shock resistant with a slimline design. Individual clip in lenses allow easy surface mount with no visible screws. | |||
Part No, Packaging | 58RM - Blister | 58AM - Blister | 58ARM - Blister | 58WM - Blister |
58RMB - Bulk box of 10 | 58AMB - Bulk box of 10 | 58ARMB - Bulk box of 10 | 58WMB - Bulk box of 10 | |
58CRM - Blister | 58CAM - Blister | 58CARM - Blister | 58CWM - Blister | |
58CRMB - Bulk box of 10 | 58CAMB - Bulk box of 10 | 58CARMB - Bulk box of 10 | 58CWMB - Bulk box of 10 | |
58RM3 - Bulk | 58AM3 - Bulk | 58ARM3 - Bulk | 58WM3 - Bulk | |
58CRM3 - Bulk | 58CAM3 - Bulk | 58CARM3 - Bulk | 58CWM3 - Bulk | |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt |
Cable: | 40cm standard, 3 metre available | 40cm standard, 3 metre available | 40cm standard, 3 metre available | 40cm standard, 3 metre available |
Current: | @13.8Volts (Red-0.12Amps) (Amber-0.10Amps) (Amber/Red-0.10Amps) (White-0.05Amps) @28Volts (Red-0.04Amps) (Amber-0.04Amps) (Amber/Red-0.040Amps) (White-0.03Amps) | |||
CRN#: | (Rear Position 36840) (Side Direction Indicator 38277) (Side marker 36841) (Front position 36842) | |||
Fitting: | Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. | |||
Compliance: | ADR / ECE approved | |||
Warranty: | 5 year warranty |
38 Series Marker Lamps with Inbuilt Reflector 135mm x 38mm x 22mm
![]() |
![]() |
![]() |
|
|
|
![]() |
![]() |
|
|
|
Product Description: | The 38 series marker lamps are fully submersible, shock resistant, feature our hexagonal lens pattern, and have a slimline design with reflex reflector. Clip on bezel allow easy surface mount with no visible screws. Various coloured brackets available. | |||||||
part no | 38RM | 38RMB | 38AM | 38AMB | 38ARM | 38ARMB | 38WM | 38WMB |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt |
Cable: | 40cm | 40cm | 40cm | 40cm | 40cm | 40cm | 40cm | 40cm |
packaging: | Blister of 1 | Poly bag of 1 | Blister of 1 | Poly bag of 1 | Blister of 1 | Poly bag of 1 | Blister of 1 | Poly bag of 1 |
Current: | @13.8Volts (Red-0.05Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) | |||||||
C.R.N: | (Rear Position 40352) (Side Direction Indicator 40377) (AM - Side marker 40385) (Side marker 40302) (Front position 40353) (Reflector 38101, 38102, 38103) | |||||||
Fitting: | Surface mount lamp onto flat surface horizontally to the ground with screws provided, run wires through back and clip bezel into place. Please refer to ADR 13/00 for mounting instructions. | |||||||
Compliance: | ADR / ECE approved | |||||||
Warranty: | 5 year warranty |
38 Series Chrome Marker Lamps with inbuilt Reflector 135mm x 38mm x 22mm
![]() |
![]() |
![]() |
|
|
|
![]() |
![]() |
|
|
|
Product Description: | The 38 series marker lamps are fully submersible, shock resistant, feature our hexagonal lens pattern, and have a slimline design with reflex reflector. Clip on chrome bezel allow easy surface mount with no visible screws. Various other coloured brackets also available. | ||||
Part No | 38CRM | 38CAM | 38CARM | 38CARMB | 38CWM |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt |
Cable: | 40cm | 40cm | 40cm | 40cm | 40cm |
Packaging: | Blister of 1 | Blister of 1 | Blister of 1 | Poly bag of 1 | Blister of 1 |
Current: | @13.8Volts (Red-0.05Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) | ||||
C.R.N: | (Rear Position 40352) (Side Direction Indicator 40377) (AM - Side marker 40385) (Side marker 40302) (Front position 40353) (Reflector 38101, 38102, 38103) | ||||
Fitting: | Surface mount lamp onto flat surface horizontally to the ground with screws provided, run wires through back and clip bezel into place. Please refer to ADR 13/00 for mounting instructions. | ||||
Compliance: | ADR / ECE approved | ||||
Warranty: | 5 year warranty |
38 Series Marker Lamps with Right Angle Bracket 160mm x 62mm x 42mm
![]() |
![]() |
![]() |
|
|
|
![]() |
![]() |
|
|
|
Product Description | The 38 series marker lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Slimline design with reflex reflector. Clip on bezel allow easy surface mount with no visible screws. | ||||
Part No | 38RMBKT | 38AMBKT | 38ARMBKT | 38ARMBKTR | 38WMBKT |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt |
Cable: | 40cm | 40cm | 40cm | 40cm | 40cm |
Packaging: | Blister of 1 | Blister of 1 | Blister of 1 | Blister of 1 Right side | Poly bag of 1 |
Current: | @13.8Volts (Red-0.05Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) | ||||
C.R.N: | (Rear Position 40352) (Side Direction Indicator 40377) (AM - Side marker 40385) (Side marker 40302) (Front position 40353) (Reflector 38101, 38102, 38103) | ||||
Fitting: | Mount lamp onto flat surface horizontally to the ground with 90° bracket and screws provided, run wires at back through middle hole in bracket. Please refer to ADR 13/00 for mounting instructions. | ||||
Compliance: | ADR / ECE approved | ||||
Warranty: | 5 year warranty |
38 Series Magnetic Marker Lamps 135mm x 38mm x 29mm
![]() |
![]() |
![]() |
|
|
|
![]() |
![]() |
|
|
|
Product Description | The 38 series marker lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Slimline design with reflex reflector. Clip on bezel allow easy surface mount with no visible screws. | ||||
Part No | 38RMMB | 38AMMB | 38ARMMB | 38WMMB | |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | |
Cable: | 40cm | 40cm | 40cm | 40cm | |
Packaging: | Poly bag of 1 | Poly bag of 1 | Poly bag of 1 | Poly bag of 1 | |
Current: | @13.8Volts (Red-0.05Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) | ||||
C.R.N: | (Rear Position 40352) (Side Direction Indicator 40377) (AM - Side marker 40385) (Side marker 40302) (Front position 40353) (Reflector 38101, 38102, 38103) | ||||
Fitting: | Mount onto flat metal surface with magnetic base, run wires through back. Please refer to ADR 13/00 for mounting instructions. | ||||
Compliance: | ADR / ECE approved | ||||
Warranty: | 5 year warranty |
44 Series Slimline Marker Lamps - 100mm x 44mm x 12mm
Product Description | These marker lamps are an easy one piece fit with a low profile and including a reflex reflector in the assembly. | ||||||
Part No: | 44RME | 44WRME | 44AME | 44AMEB; | 44WAME | 44WME | 44WWME |
Voltage: | 12-24 volt | 12-24 volt | 12-24 volt | 12-24 volt | 12-24 volt | 12-24 volt | 12-24 volt |
Cable: | 50cm | 50cm | 50cm | 50cm | 50cm | 50cm | 50cm |
Packaging: | Blister of 1 | Blister of 1 | Blister of 1 | Poly bag | Blister of 1 | Blister of 1 | Blister of 1 |
Current: | @13.8Volts (Marker-0.02 Amps) @28Volts (Marker-0.03 Amps) | ||||||
C.R.N: | R1-E9-02 (Rear Position Component number 6282) E900SM1 (Side marker Component number 1331) A-E9-02(Front position Component number 6283) | ||||||
Fitting: | Surface mount onto flat surface horizontally with screws, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions. | ||||||
Compliance: | ECE approved | ||||||
Warranty: | 5 year warranty |
1490/1491 Series Marker Lamps - 110mm x 40mm x 25mm
![]() |
![]() |
![]() |
![]() |
|
|
|
Product Description | The 1490/1491 series marker lamps are fully submersible, shock resistant and have a built in reflector. There are two fitting options available, flat surface or 90° bracket .These lamps are E.C.E and E mark approved. | |||
Part No | 1490RM | 1490AM | 1490WM | |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | |
Cable: | 20cm | 20cm | 20cm | |
Current: | @13.8Volts (Red-0.05Amps) (Amber-0.05Amps) (White-0.05Amps) - @28Volts (Red-0.07Amps) (Amber-0.07Amps) (White-0.04Amps) | |||
C.R.N: | E9 00 SM1 02 1A (Rear Position Component number 1357) (Side marker Component number 1354) (Front position Component number 1358) | |||
Fitting: | Mount lamp onto flat surface horizontally to the ground, 1490 remove lens from base and fix with screws provided, and for 1491 with 90° bracket and screws provided. Please refer to ADR 13/00 for mounting instructions. | |||
Compliance: | ECE approved | |||
Warranty: | 5 year warranty |
1490/1491 Series Marker Lamps with Bracket 110mm x 64mm x 25mm
![]() |
![]() |
![]() |
![]() |
|
|
|
Product Description | The 1490/1491 series marker lamps are fully submersible, shock resistant and have a built in reflector. There are two fitting options available, flat surface or 90° bracket .These lamps are E.C.E and E mark approved. | |||
Part No | 1491RM | 1491AM | 1491WM | |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | |
Cable: | 20cm | 20cm | 20cm | |
Current: | @13.8Volts (Red-0.05Amps) (Amber-0.05Amps) (White-0.05Amps) - @28Volts (Red-0.07Amps) (Amber-0.07Amps) (White-0.04Amps) | |||
C.R.N: | E9 00 SM1 02 1A (Rear Position Component number 1357) (Side marker Component number 1354) (Front position Component number 1358) | |||
Fitting: | Mount lamp onto flat surface horizontally to the ground, 1490 remove lens from base and fix with screws provided, and for 1491 with 90° bracket and screws provided. Please refer to ADR 13/00 for mounting instructions. | |||
Compliance: | ECE approved | |||
Warranty: | 5 year warranty |
Marker Lamps - 105mm x 31mm x 30mm
![]() |
![]() |
![]() |
|
|
|
![]() |
Marker Lamps - 74mm x 38mm x 25mm
![]() |
![]() |
![]() |
|
|
Product Description: | These marker lamps are fully submersible and shock resistant, with chrome or black bases available separately. | ||||
Part No | 1474R | 1474A | 1474W | 1459R | 1374A |
Voltage: | 12 Volt | 12 Volt | 12 Volt | 12 Volt | 12 Volt |
Cable: | 20cm | 20cm | 20cm | 20cm | 20cm |
Current: | 74mm @13.8Volts (Red-0.07Amps) (Amber-0.12Amps) (White-0.24Amps) | ||||
Fitting: | Fit base to fixing surface run wire through back of base and plug into positive outlet in back of lamp, push lamp into base with negative outlet slotting into female earth in base. Lamps require bases for fitting. |
||||
Compliance: | DOT / SAE approved | ||||
Warranty: | 5 year warranty |
1458 Series Marker Lamps - 74mm x 38mm x 26mm
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
|
|
Product Description | The 1458 series marker lamps are designed for the budget conscious consumer, fully submersible and shock resistant. Individual clip in lenses allow easy surface mount with no visible screws. Available in single bulk packs. | ||||
Part No | 1458RM | 1458AM | 1458ARM | 1458WM | |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | |
Cable: | 20cm | 20cm | 20cm | 20cm | |
Current: | @13.8Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.03Amps) @28Volts (Red-0.05Amps) (Amber-0.05Amps) (Amber/Red-0.05Amps) (White-0.04Amps) | ||||
C.R.N: | (Rear Position 39437) (Side Direction Indicator 39436) (Side marker 39468) (Front position 39438) | ||||
Fitting: | Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place please refer to ADR 13/00 for mounting instructions. | ||||
Compliance: | ADR approved | ||||
Warranty: | 5 year warranty |
1685/1284 Series Marker Lamps - 152mm x 52mm x 29mm
![]() |
![]() |
![]() |
|
|
Marker Lamps - 149mm x 52mm x 35mm
![]() |
![]() |
![]() |
|
|
Product Description | The 1685 and the 1284 series marker lamps are fully submersible and shock resistant. Slimline design with reflex reflector. | ||||
Part No | 1685RB | 1685AM | 1685AB | 1284R | 1284A |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12 Volt | 12 Volt |
Cable: | 29cm | 29cm | 29cm | 15cm | 15cm |
Packaging: | Poly bag of 1 | Blister of 1 | Poly bag of 1 | Poly bag of 1 | Poly bag of 1 |
Current: | @13.8Volts (Red-0.05Amps) (Amber-0.05Amps) 1685AM only @28Volts (Amber-0.04Amps) | ||||
C.R.N: | (1685AM Side Marker 39221) (1685AM Reflector 39222) | ||||
Fitting: | Surface mount lamp onto flat surface horizontally to the ground with screws provided, run wires through back, please refer to ADR 13/00. | ||||
Compliance: | 1685AM, 1685AB; ADR (amber) approved. All: DOT/SAE approved | ||||
Warranty: | 5 year warranty |
1282/1369 Series Marker Lamps - 79mm x 51mm x 24mm
![]() |
![]() |
![]() |
|
|
Marker Lamps - 102mm x 19mm x 35mm
![]() |
![]() |
![]() |
|
|
Description: | The 1282 and the1369 series marker lamps are fully submersible and shock resistant. Slimline design. Perfect for the budget conscious consumer. | |||
Part No | 1282R | 1282A | 1369R | 1369A |
Voltage: | 12 Volt | 12 Volt | 12 Volt | 12 Volt |
Cable: | 13cm | 13cm | 16cm hard wired with round connectors | |
Current: | @13.8Volts (Red-0.06Amps) (Amber-0.05Amps) | @13.8Volts (Red-0.05Amps) (Amber-0.05Amps) | ||
Fitting: | Remove lens from base and fit onto flat surface using single bolt supplied. Run wire through hole in base, refit lens into place. | Surface mount lamp with screws, run wires at back of lamp through hole in mounting surface. | ||
Compliance: | DOT / SAE approved | |||
Warranty: | 5 year warranty |
Marker Lamps - 71mm Diam x 17mm high, 94mm Diam x 19mm high
![]() |
![]() |
![]() |
![]() |
|
|
|
|
|
Product Description | These marker lamps are fully submersible, shock resistant and are suited for the budget conscious consumer. | |||
Part No | 1477R | 1477A | 1479R | 1479A |
Voltage: | 12 Volt | 12 Volt | 12 Volt | 12 Volt |
Cable: | Use Part number 3591 | Use Part number 3591 | Use Part number 3591 | Use Part number 3591 |
Current: | @13.8Volts (Red-0.04Amps) (Amber-0.05Amps) | |||
Fitting: | Fit grommet into cut out in fixing surface, run wires through back and plug into back of lamp, push lamp into grommet. | |||
Compliance: | DOT / SAE approved | |||
Warranty: | 5 year warranty |
Marker Lamps - 71mm Diam x 17mm high, 94mm Diam x 19mm high
![]() |
![]() |
![]() |
![]() |
|
|
|
Product Description: | These extremely low profile marker lamps are water proof, shock resistant and have a tough rubber housing with sheathed cable for ad2d0emdm protection. They are perfect for small tight spaces. | ||
Part No | 181RME | 181AME | 181WME |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt |
Cable: | 20cm | 20cm | 20cm |
Packaging: | Blister pack of 1 | Blister pack of 1 | Blister pack of 1 |
Current: | @13.8Volts (Red-0.03Amps) (Amber-0.03Amps) (White-0.03Amps) | ||
C.R.N: | ADR compliant under ECE approval (02R1 E9 CRN 6257) (00SM1 E9 CRN 1005) (02A E9 CRN 6258) | ||
Fitting: | Mount onto flat surface and push lamp and rubber housing into cutout (20mm in diameter) in mounting surface. Please refer to ADR13/00. | ||
Compliance: | ECE approved | ||
Warranty: | 5 year warranty |
Rubber Marker Lamps - 193mm x 169mm x 66mm
Rubber Marker Lamps - 101mm x 82mm x 66mm
![]() |
![]() |
![]() |
|
|
|
![]() |
![]() |
![]() |
|
|
Product Description: | These marker lamps are fully submersible, shock resistant and are suited for the budget conscious consumer. | |||||
Part No | 1004R | 1004L | 1004RE | 1004LE | 1004ARM | 1005WRM |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt | 12-24 Volt |
Cable: | 40cm from lens | 40cm from lens | 40cm from lens | 40cm from lens | 40cm | 40cm |
Current: | @13.8Volts (Red-0.03Amps) (Amber-0.06Amps) (White - 0.02) - @28Volts (Red-0.04Amps) (Amber-0.06Amps) (white-0.03) | |||||
C.R.N: | TBA | TBA | (Red 02 R1 E4 7895) (White 02A E4 7895) | 43129 | (Red 02 R1 E4 7895) | |
Fitting: | Fix to flat surface, amber facing forward and red facing to the back with two bolts supplied. | |||||
Compliance: | ADR / ECE approved | |||||
Warranty: | 5 year warranty |
Cat 6 Side Direction Indicators - 150mm x 88mm x 30mm
![]() |
![]() |
![]() |
|
|
Product Description: | The 3102 series Category 6, side direction indicators are available in a chrome or black ABS/polycarbonate mounting bracket. They are fully sealed,water proof with tough ABS lens. | |
Part No | 3102BM | 3102CM |
Voltage: | 9 Volt - 33 Volt | 9 Volt - 33 Volt |
Cable: | 19cm | 19cm |
Packaging: | Box of 1 | Box of 1 |
Current: | @13.8v (0.20Amp) - @28v ( 0.10Amp) | |
C.R.N: | 61333 | |
Fitting: | Left or right hand mountable. Surface mount bracket onto flat surface horizontally to the ground using three screw points, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. |
Low Profile Recessed Marker Lamps
![]() |
![]() |
![]() |
|
|
|
Product Description | Extremely low profile, only 3mm | |||
Part No | 7922RMB | 7922AMB | 7922WMB | |
Voltage: | 12-24 Volt | 12-24 Volt | 12-24 Volt | |
Compliance: | ECE Australian Road Approved | |||
Warranty: | 5 year warranty |