Deutsch HD30/HDP20 Series

Series Features

  • Industry proven.
  • Environmentally sealed.
  • Designed specifically for the truck, bus, mining and construction industry.
  • Available in metal (HD30) or thermoplastic housings (HDP20).
  • Multiple pin configurations that accept contact sizes 4 through 20.
  • Quick connect/disconnect bayonet coupling.
  • Single hole bulkhead mounting.
  • Rear insertion/rear removal contact system.
  • HD30 and HDP20 series are cross compatible.
  • Resistant to most fluids.
Specifications
Housing (HD30) : Aluminum
Housing (HDP20) : Thermoplastic
Seal : Silicon Rubber
Shock : 50G
Vibration : 20G rms 10 - 2000Hz
Operating Temperature : -55­­°C to 125°C
 
 

 

 

 

Recommended Wire Insulation O.D.

Contact
Size
N - Normal Seal - Green Ring T - Thin Seal - Gray Ring E - Extra Thin Seal - Blue Ring
Inches mm Inches mm Inches mm
20 0.040 - 0.095 1.02 - 2.41 0.040 - 0.095 1.02 - 2.41 0.040 - 0.095 1.02 - 2.41
16 0.100 - 0.134 2.54 - 3.40 0.088 - 0.134 2.23 - 3.40 0.053 - 0.120 1.35 - 3.05
12 0.134 - 0.170 3.40 - 4.32 0.113 - 0.170 2.87 - 4.32 0.097 - 0.158 2.46 - 4.01
8 0.190 - 0.240 4.83 - 6.10 0.170 - 0.240 4.32 - 6.10 0.135 - 0.220 3.43 - 5.59
4 0.280 - 0.292 7.11 - 7.42 0.261 - 0.292 6.63 - 7.42 0.261 - 0.292 6.63 - 7.42

 

18 Shell Size Arrangements

18-6-XX-C030 18-8 18-14 18-20 18-21
2 x size 4, 4 x size 16
Cavities 1, 2, 5, 6 are blocked
N
8 x size 12
N, E
14 x size 16
N, T, E
2 x size 16, 18 x size 20
N, E
21 x size 20
N

 

24 Shell Size Arrangements

24-9 24-14 24-16 24-18
1 x size 4, 2 x size 8,
6 x size 12
N, E
1 x size 4, 1 x size 12,
12 x size 16
N, E
16 x size 12
N, E
1 x size 8, 3 x size 12,
14 x size 16
N, E

 

 

24-19 24-21 24-23 24-29 24-31
6 x size 12, 13 x size 16
N, E
4 x size 12, 17 x size 16
N, E
23 x size 16
N, T, E
4 x size 12, 19 x size 16,
6 x size 20
E
31 x size 16
T, E

 

 

24-33 24-35 24-47 24-91
33 x size 20
N
3 x size 16, 32 x size 20
N, E
5 x size 16, 42 x size 20
E
2 x size 8, 2 x size 12,
5 x size 16
N, E

 

 

Strain Relief - HD30 Series Backshells

0409-201-1800

0409-201-2400

WHDS-18-1

WHDS-24-1

WHDS-18-2

WHDS-24-2

WHDS-18-2
Part No. Orientation Shell Size
0409-201-1800 Straight 18
0409-201-2400 Straight 24
WHDS-18-1 Straight 18
WHDS-24-1 Straight 24
WHDS-18-2 90° 18
WHDS-24-2 90° 24

 

Mounting Hardware - HD30 Series
      
Lockwasher
      
Panel Nut

Receptacle shown with
Lockwasher and Panel Nut
Part No. Description Shell Size A (mm) B (mm)
114021 Lockwasher 18 47.90 1.57
112264 Lockwasher 24 52.68 1.57
114020-90 Panel Nut 18 42.80 4.52
112263-90 Panel Nut 24 47.63 4.52

 

Mounting Hardware - HDP20 Series
      
Lockwasher
      
Panel Nut

Receptacle shown with
Lockwasher and Panel Nut
Part No. Description Shell Size A (mm) B (mm)
2414-002-1886 Lockwasher 18 47.90 0.51
2414-001-2486 Lockwasher 24 52.68 0.51
2411-002-1805 Panel Nut - Plastic 18 42.80 6.35
2411-001-2405 Panel Nut - Plastic 24 47.63 6.35

 

Accessories

HD30-18-BT

HDB30-24

HD30-24-BT-BK-90

HDC34-18

HDC34-24

HDC36-24
Part No. Description Shell Size Length Material Colour
HDB30-18 Protective insulator/boot 18 150mm PVC Grey
HD30-18-BT Protective insulator/boot 18 80mm Plastisol Grey
HDB30-24 Protective insulator/boot 24 150mm PVC Black
HD30-24BT-BK Protective insulator/boot 24 80mm Plastisol Black
HD30-24BT-90-BK Protective insulator/boot - 90° 24 80mm Plastisol Black
HDC34-18 Protective dust cap - receptacle 18 - Aluminium -
HDC34-24 Protective dust cap - receptacle 24 - Aluminium -
HDC36-18 Protective dust cap - plug 18 - Aluminium -
HDC36-24 Protective dust cap - plug 24 - Aluminium -

 

^^ Back To Top ^^